10A - 60A Explosion Proof Switch , 3 Pole Explosion Proof Transfer Switch

explosion proof transfer switch 10A-60A , 3 pole explosion proof switch

Description:

The explosion proof transfer switch has a voltage of 220V-380V, and the built-in transfer switch is used as a power supply switch in the electric circuit of current 10-60A, and can control the motor starting, stopping, shifting, reversing, etc. for the composite explosion-proof structure, the switch box The explosion-proof structure is adopted, and the junction box adopts an increased safety structure.

Application:

Designed for Explosive atmosphere Zone land Zone 2

Designed for Groups IIA, IIB, IIC

Designed for Combustible dust Zone20, Zone 21, Zone22

Designed for Temperature classesT6

Apply to oil drilling platforms, offshore oil platform, oil derrick, etc for the dangerous sites

Features:

1, The explosion proof transfer switch encolsure is cast aluminum, surface sprayed;

2, the product is in the voltage 220V-380V, the built-in transfer switch is used as the power supply switch in the electric circuit of current 10-60A, and can control the starting, stopping, shifting, reversing, etc. of the motor;

3, steel pipe and cable wiring

4. Composite explosion-proof structure, the switch box adopts the explosion-proof structure, and the junction box adopts the increased safety structure.

5, in the electrical equipment and power distribution equipment infrequently connected breaking load circuit and short-circuit protection with built-in switches and fuses, can quickly break and close the steel pipe or cable wiring, cable wiring must be equipped with cable clamping sealing joint

6. This product is a 3-pole switch, which can be used as a 2-pole switch. If you need a 4-pole switch, the housing specifications need to be changed accordingly.

7, in line with GB3836-2000, IEC60079 standard requirements

8, built-in transfer switch, used in electrical lines below 60A, as a power supply switch, and can control motor starting, shifting, stopping, reversing, etc.

9, this product is a 3-pole switch, which can be used as a 2-pole switch. If you need a 4-pole switch, the housing specifications need to be changed accordingly.